1 steel rod 1 inch steel plate where to buy steel plate

7, pouring good signs, at room temperature 20 ℃ -30 ℃ cured 10-24 hours harden, becoming left the surface of the crystal plate.8, in case of stickers, trademarks, etc., in itself is very thin, and the boundary is not obvious, when pouring, likely to cause Shuijingjiao spill to reach 2mm thickness will be difficult, so make Shuijingjiao grasp different situations, control viscosity, In the application process, you can put 1-2 hours in order to increase the viscosity, adapt thin Shuijingjiao casting.9, making more than 2mm thick crystal glue signs, can be divided into secondary Epoxy, after the first dispensing, curing for 3-5 hours, then dropping layer.10, Epoxy after cleaning, regardless of manual dispensing, or automated dispensing, after the completion of the machinery, equipment, containers are required to clean, because the Shuijingjiao hardened, insoluble in any solvent, therefore it must not harden before the machine , the containers are required to clean (Recommendation: Use acetone or ethanol)

Aluminum signs, classification and production

?In the classification of signs, aluminum signs (the aluminum plate) occupies a part of, and aluminum have their own brand in their own classification, in simple terms, is divided into three types: black silver word, silver face black, silver at the end Silver word. As for the other colors of signs, nameplates do not belong to Al licensing category.???????Al licensing production and other production processes signs have in common, there are differences between the law, we look at the following specific description:First, the bottom of the color production methods. ⑴ oxide (such as gold at the end, silver bottom, red, black, etc.) ⑵ painting: bottom spray according to customer requirements in different colors of paint (commonly used colors, jet black, blue, red, orange, gray, silver , green, etc.) ⑶ painting: painting must have edges blocked at the paint will not flow, it is required to have a border, or painting is that depressed. (Color according to customer requirements modulation different colors of paint)Second, font color processing method: ⑴ screen: After the product font high light, to make the projections different font colors, screen printing methods may be used to achieve the font on the same plane can screen a variety of colors, you must complete each screen After a post-color printing and then oven dried before other colors. ⑵ Plating: Signs font high light after plating according to customer requirements in different colors (such as: black, gold, red, chrome) ⑶ painting (with the bottom of the painting method as mentioned above).