Nominal Diameter (mm) | Diameter Tolerance (mm) | Tensile strenght (Mpa) | Yield strenght (Mpa) | Elong.at max.force | Bending number 180o |
4 | ±0.04 | 1470 | 1290 | 3.50% | 4 |
4.8 | 1570 | 1380 | |||
5.00 | ±0.05 | 1670 | 1470 | ||
1770 | 1560 | ||||
1860 | 1640 | ||||
6.00 | 1470 | 1470 | |||
6.25 | 1570 | 1570 | |||
7.00 | 1670 | 1670 | |||
7.50 | 1770 | 1770 | |||
1860 | 1860 | ||||
8.00 | ±0.06 | ||||
9.00 | 1470 | 1470 | |||
9.50 | 1570 | 1570 | |||
10.00 | 1670 | 1670 | |||
11.00 | 1470 | 1290 | |||
12.00 | 1570 | 1380 |