Heavy Hammer Crusher For Sale/Pc Series Hammer Crusher
China [CN] Hammer crusher can crush medium-hardness material with maximum feed size 600-1900mm, compression strength less than 200Mpa into finished product with size 40-25mm at once. It can be widely used in cement, chemistry, building material, and the brittle material with low water and mud content. This machine applies to crushing various medium hardness and brittleness material, being broken material for coal, cement, gypsum, alum, brick, watts, limestone, etc. Its material the compressive strength of no more than 300 mpa, humidity is not more than 15%.
1. Select hammer crusher according to the required scale of production.
The size of Pc Series Hammer Crusher/Heavy Hammer Crusher For Sale model determines its production. According to the configuration of crushing process, the output of the selected machine should be 10% larger than designed production.
2. The gap between hammer and sieve cannot be too large or too small.
Here the gap means the one from the end of the hammer to the sieving slice. When the gap is too large, some material that is far away from the hammer will hardly be hit by it, meanwhile the sieve friction on material will be weakened due to low speed, so the finished products will not be fine enough. If the gap is too small, the speed of the material on the sieve is too high to go through the sieve hole, which makes the effect of friction more prominent to make the material too fine, and that is not conducive to powder evacuation.
3. Select corresponding hammer crushers whose line speed matches the required fineness of the product.
If the line speed of hammers does not match the fineness of product, the efficiency of the crusher will be reduced, and the crusher machine even cannot work properly. Low line speed causes longer crushing time, which will cause the material to be piled in the crushing chamber, which brings poorer efficiency and effect, and increase the resistance to the hammers. On the other hand, too fast line speed can cause uneven granularity and wasteful power consumption. Generally, the finer the material requires, the higher line speed hammer crusher we should adopt.
Henan Fote Heavy Machinery Co., Ltd. pays attention to basic management, which implements the computer information and computer technology for production management, product development and design equipped with advanced computer-aided design systems, and through ISO9001-2000 quality certification. The products of our company have been sold and exported all over the country and abroad. Welcome to visit and purchase.
Contact Information
Email: info@sinoftm.com
Website: www.ftmmachine.com/products/crushing-machine/34.html
Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China
Click enlarge Image
