Introduction of briquette machine
1. The press rollers use 65mn rigid material with good abrasion resistance, lengthening effectively service life of the press rollers, and the pressure can be as big as 15 tons.
2. The charcoal briquette machine is the latest style, it can work automatically and design with vertical structure, upper and nether beams of cast steel, so it is very easy to operate.
3. The final products with high strength and high burning rate, are smokeless, testless, non-toxic and no harm to human beings.
Advantage of briquette machine
1. High profit and low cost in raw material
2. Increase the calorific value per unit volume after briquetting
3. Energy saving, friendly-environment, Low-consumption
4. No chemical additives, no smell, no smoke
5. Easy to transport and store as densities product
6. High briquetting ratio, high pressure coal briquetting machine
Raw materials of briquette machine
(1).Coal powder/coal fine/coal dust
(2).Charcoal powder/charcoal fine/charcoal dust
(3).Gypsum/Desulfurization Gypsum/quicklime/slaked lime/
(4).Activated carbon/carbon black
(5).All kinds of metal powder/Manganese/magnesium/copper/iron
(6).Iron oxide/aluminum oxide/clay
(7).Some other type powder.
Formation and Working principle of briquette machine
Formation: our mineral ball press machine, consists of three parts: the feed section, the transmission part and the molded part.
The working principle of the coal press machine is: first, the motor transmits power to transmission through the belt; at the same time, the transmission out put shaft power to propeller through the floating coupling; then, the thruster of propeller push forward coal through forming die to produce the high density coal balls.
If you have any more question of this machine, please contact with me!
China [CN] 
Click enlarge Image