Good Quality Straw Pellet Machine Manufacturer

Good quality straw pellet machine manufacturer is special used for granulating of lightweight raw materials,such as saw dust, straw, forage grass, chrysanthemum and palm leaves, etc. This machine uses the hydraulic transmission,with two cylinder operate,durable and powerful. It uses the button common control which may realize the many kinds of work way.the machine working pressure traveling schedule scope can be adjusted according to the material bale size. Special feed opening and automatic output packageof equipment. The operation is simple. The feed opening install the interlocking device which will be safe and reliable.

As discussed, to produce a pellet, pressure is required to compress the material in the chamber of pellet making machine. And all good quality straw pellet machine manufacturers know that pressure can be altered through the type of die, die metal and roller height. Therefore, pelletizer manufacturers and pellet making experts take more efforts to improve the die part. Also as discussed pressure is also dictated by the characteristics of the raw material. Therefore, another way to alter the pressure to form a pellet is to alter the materials' characteristics. This can be achieved through adding water, vegetable oil or other binders into the pellet making material at either the conditioning stage or in the pelletizing machine. Water and vegetable oil, to a certain extent, can both act as binders. Also the ability to alter these parameters means one type of die can be used to process many different materials.

Before make pellets with your good quality straw pellet machine, you shoud check the moisture of raw material

1. Moisture content required is specific because of the differences in natural lignin and pressure requirements.

2. Straw pellet machines require moisture content of raw material somewhere between 10-20% moisture content required is specific to that raw material.

3. During the production process of pelletizer equipments moisture is lost as steam, if the finished pellets are dense, smooth and shiny they should have moisture content at 10% or below.

4. The moisture content of the raw material (straw included) plays an integral role in how the material performs in the straw pellet making machine. Too little or too much moisture and quality pellets cannot form, it’s also important to keep the level of moisture within the finished pellet as low as possible, so the pellets burn efficiently. Moisture is required to produce pressure, and therefore, heat the two essentials of pellet production.

Contact Infomation

Email: info@sinoftm.com

Website: http://www.paradisedivingasia.com/equipment/straw-pellet-mill.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China