Cryolipolysis With 4 Handles/ETG50-4S
The Forth Generation of Frozen Weigth Loss Technology
1) Three working modes .
2) The parental thermal separation technology
3) Super frozen wave control technology
4) Anti - frostbite control technology
5) Dual -head simulaneous working technology
6) Antomatic fault detection technology
7) Intelligrnt vacuum stabilization technology
8) The exclusive technology for vendors
Working Theory
It adopts an advanced cooling technology to proper target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues .when fat cells are exposed to precise cooling, triglyceride in fats will be converted into solid in particular low temperatures ,then they trigger a process of natural removal that gradually reduces the thickness of the fat layer. It shows that the fat cells in the treated area are gently eliminated through the body’s normal metabolism process, to eliminate unwanted fat
Character
|
1.Four different cryolipolysis handle for different areas.
Size:
Most Big handle size: 330*90*110mm
Big handle size: 200*70*90mm
Mid hanle size: 160*60*65mm
Small handle size: 100*50*65mm
For the different part treatment you can chose working hands and the machine
can automatic identification handle two of them can work together .
|
|
2. Lowest temperature
Cooling handle will reach to -13 degree .
|
|
3. LED theory
1) Green light can reduce the skin swelling in the freezing treatment .
2) Red light can speed up blood circulation and oxygen to increase activity .
|
|
4. Fat ruler caliper
Measure the fat thickness, help you to select the mode of treatment .
|
|
5. New design Anti-freezing Membrane
Protect skin froming freeze injury .
|
Obovious Effect
Parameter
|
TYPE
|
Cryolipolysis-Beauty-Machine
|
|
IUPUT
|
220V/50Hz OR 110V/60Hz
|
|
POWER
|
800VA
|
|
HEAT
|
37°c ~ 45°c
|
|
CRYO
|
-13°c ~ 5°c
|
|
VACCUM
|
10~ 80Kpa
|
|
LIGHT
|
Red (630nm) Green (570nm)
|
|
COOLING LIQUID
|
Pure water or special coolant
|
|
VOLUME
|
56cm Χ 65cm Χ 118cm
|
|
FUSE
|
T3.15AL250V
|
|
AMBIENT TEMPERATURE
|
5°c ~ 40°c
|
|
RELATIVE HUMIDITY
|
≤80%
|
|
ATOMOSPHERIC PRESSURE
|
86Kpa ~ 106Kpa
|
♦ What are the characteristics of ETG50-4S cool fat - dissolving method ?
The second generation of freeze fat-dissolving method is developed by Niky Technology and obtain patent : according to the first generation of pure freeze system that will cause blood coagulation and tissue necrosis damage ,we improve to a safe fat dissolving method that heat the skin first ,make the blood and fat completely separation and then began to the freeze fat dissolving treatment .Especially we can do two parts in the same parts in the same period of treatment .it saves time and also obtain good effect
♦ What is the process of the freeze fat dissolving method ?
--Complete the treatment table
--Ask and check the physical condition
-- Locate the treated area
-- Paste antifreeze membrane
-- Begin to treatment
-- Having a rest after finished ,if no discomfort you could leave .
♦ How does the freeze fat -dissolving method work ?
Frozen wave controlled by non-invasive launcher precisely work on the treated
parts ,in particularly the parts of the body that need to remove the fat cells .the whole process lasts for 1 hour
♦ What reactivity of the fat cells ?
When fat cell are exposed to the precise cooling ,they trigger a process of nature removal that gradually reduce the thickness of the fat layer .And the fat cells will be removal through the body’s normal metabolism process mildly.
♦ Who is the good candidate for cryolipolysis machine ?
Cryolipolysis is not a weight loss solution for people who are obese, or a substitute for surgical methods such as liposuction. Good candidates have noticeable bulges in certain areas they’d like to get rid of. Your doctor will determine if treatment is right for you during a one-on-one consultation.
♦ What is the feeling during the treatment ?
Using of exact computer program to control the temperature accurately within the safe range .The first 3~5 minutes you have warm feeling ,than the treatment area will feel cold gradually .In clinical experience ,no one needs to use medication for pain because of no invasive wound ,therefore we will not feel painful unlike other freeze surgery .At the very beginning of treatment ,there will be a little discomfort then the word head absorb fat powerfully ,but soon will disappear .After a while you will feel a little cooling paralysis ,there is no special feeling .During treatment you could play computer ,read or take a nap .
♦ How long is the treatment?
During your consultation, your doctor will discuss how much time should be allotted based on your individual treatment plan. A typical treatment can last between 45 minutes to one hour.
♦ Can i return to normal activities after my treatment?
Yes you can. The procedure is completely non-surgical, so typically you can return to normal activities immediately. Some patients experience redness, minor bruising, tingling, numbness or discomfort in the treated area, but this is temporary and will resolve completely. Often times, patients return to work after the session is over.
♦ When will i see results?
Typically, each cryolipolysis treatment results in a noticeable reduction of fat in the treated area.After the initial treatment is complete, you can attain further reductions with additional treatments,resulting in even more fat loss. Some patients find that just one treatment fully addresses their goals.What's more ,you may start to see changes as quickly as three weeks after your treatment, and will experience the most dramatic results after two months. But your body will still flush out fat cells and continues doing so for up to four to six months after treatment.
♦ Is cryolipolysis safe?Painful?Are there side effects?
Cryolipolysis is CE and RoHS cleared for the flanks (love handles) and abdomen and is proven to be a safe and effective treatment. Typically, there is minimal to no downtime after the treatment though patients may experience temporary pain or discomfort. Side effects can include redness, bruising, swelling, tenderness to the touch, cramping, itching, tingling, and numbness. Numbness can persist up to several weeks after a procedure. Your doctor can talk to you more about what to expect during and after treatment when you meet for your consultation .
Payment
We accept T/T(Telegraphic Transfer),Western Union,Moneygram,Paypal
Packaging
There’re different packages of our beauty machines:carton box,aluminium alloy and wooden
box. No matter which package,there’s cood foam inside of the box to protect the machine
during the shipment.So there’s no worry of any damages of the machine.
Delivery
Ship by express(door to door)(dhl.tnt.ups.fedex.ems)Ship by air express to airportShip by sea
Service
1. Do you have any warranty?Yes, we have. 12 months warranty on host machine is given. 3 months free replacement warranty for handles, treatment heads, and parts.2. What if the machine breaks in foreign countries?We just need the operator tell us what phenomenon of the problems. If it is small problem, we can teach and fix the machine immediately. If need parts, we send parts immediately and teach how to change the parts, which is very easy.
3. I have never used such a machine. How can I learn it?With machine, we will send manual to teach you how to use machine. And we also can online training by skype or phone call.
4. If the machine is returned by customs, what will you do?We will find why your customs return our machine and find solutions and will send a brand new machine to you immediately. If you cannot receive the machine at all, we will return your money. And machine will come back to us.
5. What courier you often use?We mostly use DHL which is the best courier and fastest. But we also accept other couriers like UPS, TNT, Fedex, EMS, by air or by sea.
6. Can you put my LOGO on the start screen instead of yours?Yes. You just need to send us a picture of your logo in high quality. Then we put your logo on start screen of the machine.
7. What is payment termsWe accept all popular payment terms like wire transfer, western union transfer,moneygram, escrow, credit, and cash.
8. What is your delivery time?We need only 2~5 days according to different machines and different quantity of your orders.For more questions, pls feel free to contact us.
9. Why should you choose us?Powerful factory, giving the competitive price and best technology support 12-years’ experience in producing beauty machine, strong R&D 1 years-warranty and 8/24 online after-sale service CE Certification, the key for you to legally use and sell the machine Diversity of customized service, strong OEM & ODM capability available.
Contact
| Contact Person |
Ms Lynn l Sales Manager |
| Mobile / Whatsapp/Viber |
0086 13724097955 |
| Skype |
k88v88 |
| Tel |
0086 2082514086 |
| Fax |
0086 2082514086 |
| Email |
lynn@itech-aesthetics.com |
0 likes
China [CN] 
Click enlarge Image