sludge dewatering equipment
0 likes
China [CN] Multi-Disk Screw Press ( Hereinafter referred as MDS ) belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. MDS using screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.
1. The sludge are transported to the flocculation tank through storage tank, and adequately mixed by the mixer.2. After big flocs are formed, the sewage is transported to the MDS screw press.4. Flocs moves from the thickening zone to the dewatering zone.5. Gaps between moving rings and fixed rings narrows, and the pressure of the end plate increases dewatering,finally the sludge cake is discharged.
5. The sludge is transported out by shaftless screw conveyor.
Name: Over All Unit
Materials: SUS304
The over all unit is made up of SUS304 material, with smooth surface. Laser cutting technical ensures the evenness of machine surface.
Name: RingsMaterials: SUS304First of all, mechanical shaping is done to the rings by imported processing equipment from Switzerland. Then manual shaping is done to control the deviation of evenness under 0.01mm.
Name: Screw ShaftMaterials: SUS304Tungsten carbide coating are done to the screw shaft surface. The hardness can reach HRC 71. The blade of screw shaft also get chamfering process treatment, to match with the ring.
Name: Spray Tube and NozzleMaterials: SUS304Spray tube uses SS304 steel, mirror polished.
Its nozzles can achieve well-distributed spray, can achieve solid cone effect,which is better than stainless steel nozzle suppliers
|
Sludge Dewatering in Petrochemical Industry
|
|
|
Model Type
|
MDS413
|
|
Watercontent
|
80%±5%
|
|
Project Details
|
Sludge Type: 70%chemical sludge+30% biosludgeSludge Concentration : 2.10%Sludge Flow Rate : 18.3m3/hDs Throughput : 143g/kg-DS/hPolymer Add Rate: 384g/kg DSCake Solid: 17%Capture Rate: ＞90%
|
|
Sludge Dewatering in textile Industry
|
|
|
Model Type
|
MDS311
|
|
Water
content
|
80%±5%
|
|
Project
Details
|
Sludge Type: 70%chemical sludge+30% biosludgeSludge Concentration : 1.40%Sludge Flow Rate : 3.0m3/hDs Throughput : 42kg-DS/hPolymer Add Rate: 8g/kg DSCake Solid: 18%Capture Rate: ＞94%
|
* Inquiry and consulting support. * Sample testing support. * View our Factory.
* Training how to instal the machine, training how to use the machine. * Engineers available to service machinery overseas.
Sales manger
Zhejiang Lifeng Enviromental Equipment Co.,Ltd.
Tel:+86-021-3159 6560Email: trista(at)dewater123.com
Web: www.dewater123.com
Alibaba: https://lfhb.en.alibaba.com
Click enlarge Image