liquid RTV 2 silicone rubber to make handmade soap mould
0 likes
China [CN] liquid RTV 2 silicone rubber to make handmade soap mould
Features of liquid RTV 2 silicone rubber to make handmade soap mould :
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Ecellent telsile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
Application of liquid RTV 2 silicone rubber to make handmade soap mould :
1.Resin crafts, unsaturated resin crafts.
2.Poly resin crafts, candle crafts, plastic crafts.
3. Making molds forgypsum,GRC,concrete,Artificial stone products molding,Wax casting, soap.
4.Decoration building mold making.
5. Lighting & candles crafts,stationery gifts,crafts industry.
6.Casting for Statue,Buddha, Christmas ornaments,sculptures, figures etc.
Instructions of liquid RTV 2 silicone rubber to make handmade soap mould :
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 3parts of Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until its completely dispersed in the base.
5. Pour the mixed Part A base silicone and curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 min under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Click enlarge Image