C10 RTR Speed Controller ESC With Power,
Protection and Bluetooth Communication
XC Technology has released two models of
speed controllers (ESCs)---C10&C8 electronic speed controllers for RTR
(Ready to Run) RC cars and trucks, supplementing product portfolio of speed
controller for RC cars and trucks.
1. Current: Continuous current 140A, peak 320A
2. Supply: 2-4s Li-Po
3. Motor:
sensorless brushless motor
4. Speed:
<240,000RPM
5. BEC:
6.0V, 7.4V, continuous current 5A, peak 10A
6.
Bluetooth: Parameter setting
7.
Dimension: 52.8*39.8*35.3mm
Do you think the RTR speed controller would
be a simplified product stemming from a powerful one? No, not exactly. C10
speed controller for RTR RC cars and trucks stems from E series electronic
speed controller-E10. The power systems of C10 and E10 are the same, the power
and performance of C10 are kept. What’s the difference?
We know that many items of speed
controllers (ESC) can be programmed such as running mode, BEC voltage
selection, acceleration (punch), braking force, turbo timing etc. XC E series speed
controllers are programmable full version, the users can program every item
according to their skill, from beginners to professionals. Sometimes the
programming makes things complicated, so we want to simplify this for some hobbyists
who wants to have some fun from driving simply.
That’s why XC Technology releases RTR C10
speed controllers. How do we define “simplifying”? It’s not about the
performance or protection. We just close some programming items. That’s it.
Sure, C10 speed controller is suitable for
hobbyists too. With a power system of 140A continuous current, 2-4S LiPo
batteries, you can do any stunt you dream of.
A Mobile App is designed for hardware
upgrade, parameter setting, viewing operating data. Especially for refit and
upgrade, this helps hobbyist judge whether the components they are using match
each other, allowing them to adjust components for achieving top performance.
Built-in Bluetooth is available. This makes
communication between speed controller and Mobile App convenient and fast. No
need to buy additional modules. Yes, no wire and computer needed. For other
brands of speed controllers, maybe you need to by a Bluetooth module, wires and
programming card. XC Technology makes these “all in one”.
With a 5A continuous current, BEC makes
servo control and response more reliable and quickly.
Intelligent thermal dissipation. When the
temperature exceeds 55 degrees, the fan will be turned on. if the temperature
drops below 50 degrees, the fan will be turned off for saving energy and
reducing noise.
IP67 waterproof. It is verified in test.
The speed controller status has been sunk in water for several hours, and it is
running all the time. This design will allow you to drive your RC cars or
trucks in any weather or terrains, don’t need to worry about permeating.
XC Technology has been focusing on
development and manufacture of speed controllers for automotive water and fuel
pumps, drones, RC hobbies, medical power tools since 2011. We provide a full
service from concept design, test, analysis and production.
Contact and have a try for a better solution and experience.