DJI Spreading Wings S1000+ with BMPCC Gimbal and A2 Flight Controller

Product Highlights

• Zenmuse Z15 3-Axis Gimbal for BMPCC• Gimbal Stabilizes Pocket Cinema Camera• Collapsible Frame and Folding Props• DJI A2 Flight Control System• Up 15 Minutes Flying at 15,000mAh• Low Gimbal Mounting with Dampening• Retractable Landing Gear• Simpler Flight Controller Installation• 2.4 GHz DR16 Radio Receiver• Redesigned Power Distribution

• DJI Spreading Wings S1000+ Professional Octocopter

  Performance
  Takeoff Weight	13.2 lb / 6 kg to 24.2 lb / 11 kg

  Motor
  Stator Size	1.6 x 0.6" / 41 x 14 mm
  Motor Velocity Constant	KV: 400 rpm/V
  Maximum Power	500 W
  Weight	With Cooling Fan: 5.6 oz / 158 g

  Electronic Speed Control (ESC)
  Working Current	40 A
  Working Voltage	6S LiPo
  Signal Frequency	30 to 450 Hz
  Drive PWM Frequency	8 kHz
  Weight	1.2 oz / 35 g

  Propellers
  Size	15 x 5" / 38.1 x 12.7 cm
  Weight	0.5 oz / 13 g

  Frame
  Diagonal Wheelbase	41.1" / 1045 mm
  Frame Arm Length	15.2" / 386 mm
  Center Frame Diameter	13.3" / 337 mm
  Center Frame Weight	With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg
  Landing Gear Size	18.1 x 20.1 x 12" / 460 x 511 x 305 mm

  Flight Control System
  Compatibility	A2 or WooKong-M
  Gain Value Settings	For A2 Flight ControllerBasic: Roll 120%, Pitch 120%, Yaw 120%Attitude: Roll 170%, Pitch 170%, Vertical 120%For WooKong-M Flight ControllerBasic: Roll 130%, Pitch 130%, Yaw 120%Attitude: Roll 180%, Pitch 180%, Vertical 120%

  General
  Power Requirements	Lithium-Polymer (LiPo):
  Power Consumption	Maximum: 4000 WHovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight
  Operating Temperature	14 to 104°F / -10 to 40°C
  Weight	9.7 lb / 4.4 kg

  Packaging Info
  Box Dimensions (LxWxH)	20.1 x 17.8 x 11.6"

• DJI A2 Flight Control System for Multi-Rotor Aircraft

  Supported ESC Output	400 Hz refresh frequency
  Supported Transmitters	With Built-in Receiver: Futaba FASST series and DJI DESST series
  Supported External Receivers	Futaba S-Bus, S-Bus2, DSM2
  Other DJI Products Supported	Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
  Hovering Accuracy (GPS Mode)	Vertical: ±1.6' / 0.5 mHorizontal: ±4.9' / 1.5 m
  Maximum Wind Resistance	< 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
  Maximum Yaw Angular Velocity	150 deg/s
  Maximum Tilt Angle	35°
  Ascent/Descent	±19.7 fps / 6 m/s
  Power Requirements	Maximum: 5 WTypical: 0.3 A at 12.5 V
  System Requirements	Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
  Operating Temperature	23 to 140°F / -5 to 60°C
  Dimensions	Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mmIMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mmGPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mmLED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mmPMU: 39.5mm x 27.6mm x 9.8mm
  Weight	Overall: 7.9 oz / 224 g

  Packaging Info
  Box Dimensions (LxWxH)	6.9 x 4.7 x 2.7"

• DJI Zenmuse Z15-BMPCC 3-Axis Gimbal for Blackmagic Pocket Cinema Camera

  Supported Camera	Blackmagic Pocket Camera
  Supported Lens	Olympus M.ZUIKO Digital ED 12mm f/2.0
  Control Requirements	At least 4 spare receiver channelsS-Bus/PPM receiver supported
  Software Requirements	For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
  Working Current	Static Current: 200 mA at 25 VDynamic Current: 400 mA at 25 VLocked-Rotor Current: 4 A at 25 V
  GCU BEC Output	10 A at 12 V
  Transmit Power	GCU Wireless Video Transmission: 1 A at 12 V
  Controlled Angle Accuracy	±0.01°
  Maximum Controlled Rotation Speed	Pan Axis: ±130°/sTilt Axis: ±130°/sRoll Axis ±30°/s
  Controlled Rotation Range	Pan Axis Control: ±360° continuous rotationTilt Axis Control: +50 to -140°Roll Axis Control: ±40°
  Power Requirements	GCU: 4S to 12 S LiPo (6S if using S800)
  Operating Temperature	14 to 122°F (-10 to 50°C)
  Dimensions	Gimbal: 9 x 8.3 x 8.3" (227 x 212 x 210 mm)GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm)
  Weight	Gimbal: 2.9 lb (1.3 kg)GCU: 2.2 oz (63 g)

  Packaging Info
  Box Dimensions (LxWxH)	10.5 x 10.2 x 9.3"