The oil used for lubrication system of turbine generators need maintenance and treatment because it may be mixed with air, water and impurities. Otherwise, it can speed up oil quality turning bad or break down the adjuster and protection system, damage the plain journal bearing, and influence the whole machine running.
Our Series FTY vacuum
turbine lube oil Filtration & Dehydration Machine is specially designed for purifying various unqualified turbine oil (such as ISO – VG – 46, 32, 68, etc.) from steam turbine system, gas turbine system & Fans, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely.
This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clean. Series FTY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.
Moisture (Water Content)
|
≤ 80 PPM
|
Gas Content
|
≤0.1%
|
Filtering Accuracy
|
≤ 5 micron
|
Demulsification Value
|
≤12 min (GB/F 7305)
|
Cleanliness
|
≤NAS 1638 Grade 6
|
1. Special polymer materials as filter medium with the functions of broken emulsification thoroughly, dewatering, removing particles
2. Duplex 3D Stereo-evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).
4. Multi-stage precision filtration process remove large quantity of particles & impurities from the oil.
5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.
7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
8. Can work online with stream turbine and hydraulic turbine.
Technical Specifications
六类
1.Series PO Portable High Precision Oil Purification & Filling System
keywords:
portable oil purifier
portable oil filter machine
Vacuum oil filling system
PO Series Portable High Precision
Oil Filtering and Filling Machine which mainly deal with unqualified insulating oil, turbine oil, lubricating oil etc., it consists with motor-driven special gear pump and multi-stage filters for filtering dirty oils by removing various sizes of particles & impurities. Small and flexible size, easy to operate and requires no filter paper and causes no contamination to the ground. It has a wider application than ordinary filter press and has a long lifetime, being a new substitute for frame filter press.
Portable oil purifier suction point is equipped with a coarse filter to protect pump, and prolong the service life of main two filters. Filter precision can be adjusted and changed according to client's actual need. This machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per user's requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works.
Pressure Gauge monitors the working status of machine and pollution levels continuously.
Vacuum oil filling system is also used for oil transferring/ filling at working fields, suitable for field portable assignments and aerial work, while oil filling, filtration is also done at same time.
1. Compact structure, small volume, light weight, easy to carry
2. Internal use high quality stainless steel maiterials filter element to filter particles, repeated use, save cost, not contaminated sites
3. Filtration precision, the product specifications can be free to choose according to need
4. Can be made into explosion-proof type, used at dangerous working area.
5. Use patented technology to produce. Such as high-effective separating separation tower, fuzzy control technology, dewatering and degassing very effectively.
6. It can purify the losing-efficient insulation oil and make the oil reach the new oil standard without power cut, changing the oil or using filtering papers.
7. Have the function of filling oil.
8. The purifier has large route, strong capability of holding dirt and can be used for a long time.
9. The ultrasonic cleaning function can be selected.
10. Stable and safe Operation with low noise.
11. Can effectively purify the tiny and fine mechanical impurity from oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.
Technical Specifications
Item
|
Unit
|
PO-32
|
PO-50
|
PO-100
|
PO-150
|
PO-200
|
PO-300
|
PO-500
|
PO-600
|
Flow rate
|
L/H
|
1920
|
3000
|
6000
|
9000
|
12000
|
18000
|
30000
|
36000
|
Lift
|
m
|
5
|
8
|
8
|
10
|
15
|
15
|
18
|
20
|
Cleanness
|
NAS
|
7
|
6
|
6
|
6
|
6
|
5
|
5
|
5
|
Power supply
|
|
380 VAC, 50 Hz, 3 Phase (or as per required)
|
Working noise
|
DB (A)
|
≤ 65 ~ 75
|
Motor Power
|
KW
|
0.75
|
1.1
|
1.5
|
2.5
|
3
|
6
|
9
|
13
|
Inlet (outlet) caliber
|
mm
|
Ф25
|
Ф25
|
Ф25
|
Ф32
|
Ф42
|
Ф50
|
Ф50
|
Ф60
|
Weight
|
Kg
|
95
|
105
|
120
|
130
|
140
|
160
|
300
|
370
|
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.