Characters:
1. Outer cover with excellent abrasion resistance and UV protection.
2. Inner cover with excellent abrasion resistance and high quality.
3. Wearing colored indicator layer.
4. Single foam flotation casing to prevent water absorption.
5. Can bear the high pressure of work.
6. The size of flange is at customers' request.
7. Bending angle: in working condition, the bending angle is from 0° - 45°.
8. Low center of gravity, strong ability of the anti-wave, good stability.
9. Easy installation,Good adhesion,long service life,the hose have four faces (be marked with 1,2, 3, 4) , so we can take turns using it (1 wear out, use 2, 2 wear out,Use 3....), easy assembly.
10. We can produce the hose up to ID1300mm, or as customers' requirement.
Inside Diameter | Working Pressure | Burst Pressure | Vacuum Pressure | AdhesiveStrength | Abrasion Value | Length | |||||
mm | inch | Mpa | bar | Mpa | bar | Kpa | bar | KN/m | Cm3 | ft | m |
254 | 10 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
304 | 12 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
350 | 14 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
400 | 16 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
450 | 18 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
500 | 20 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
550 | 22 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
600 | 24 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
800 | 32 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
850 | 34 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
900 | 36 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1000 | 40 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1200 | 48 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1300 | 52 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
NOTE: Other Parameters are by your requirement |