membrane filter press for mining

Membrane filter press

1,Reduce the moisture of the filter cake greatly.Compared with the common type pp filter plates,the membrane type filter plates has a membrane,which can move forward and backword to squeeze the filter cakes.when the membrane filter plates are filled with water or air,the membrane will bloat towards the filter cake,then the filter cake will be squeezed by the membrane evenly.This means after the filtration process,the filter cakes will be squeezed again.

2,Reduce the running cost (energy saving)and filtration time greatly.As regard to the chamber filter plates,the chamber must be filled full in order to get a dry filter cake,along with the filtering process,the filter cake gets thicker and the resistance of dehydration increases doubly,which results in the great reduce of the filtering speed.In general ,for a chamber filter press,the 70% are filtered at first half of one filtering process.while when comes to the membrane filter press,it can save the second half of the filtering process and start membrane squeeze directly,this greatly increase the filtering efficiency and make the filtering time much shorter.

3,Extend the life time of the filter press.With the pressure increase during filtration,the very high pressure difference is bad for the filter plates,while for membrane filter press,it is low pressure filtering and high pressure membrane squeezing ,this avoids the big pressure difference for the filter plates,which is the main reason of breakage of the filter plates.