Substrates
|
Dried and sanded existing finishes, all kinds of primer and putty.
|
||
Surface Cleaning
|
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
|
||
Mixing Ratio
|
BYTF606-2K Primer Surfacer
|
BYTH106 2K Primer Hardener
|
Thinner
|
4
|
1
|
1-1.5
|
|
<15℃
|
BYTF606 2K Primer Surfacer
|
BYTH106 2K Primer Hardener
|
BYTX-1 Fast Thinner
|
15-30℃
|
BYTF606 2K Primer Surfacer
|
BYTH106 2K Primer Hardener
|
BYTX-2 Standard Thinner
|
>30℃
|
BYTF606 2K Primer Surfacer
|
BYTH106 2K Primer Hardener
|
BYTX-3 Slow Thinner
|
Pot-Life
|
At 20°C, 3 hours mixed with hardener, thinner
|
||
Spray Viscosity
|
14-16s to drop off, in 4# viscosity cup at 25°C,
|
||
Spray Gun Set Up
|
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2
|
||
Spray Technology
|
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature andpaint film.
|
||
Drying Time
|
A. Allow 10-20 minutes air-drying,then 60°C baking 20 minutes, can sand after cool down.B. Air-drying time 3 hours, at 20°C.
|
||
Shelf Life
|
2 years in original sealed can, cool and dry place at 25℃.
|
||
Package
|
1L×12 or 3.75L×4
|