BYTF605-Epoxy Primer

본문 바로가기


Home > Product > BYTF605-Epoxy Primer
Selling leads
BYTF605-Epoxy Primer
Posting date : Mar 07, 2019
Membership
Free Member Scince Jul 22, 2016
FOB Price
1000
Min. Order Quantity
100 piece
Supply Abillity
1000 pc/month
Port
Shenzhen
Payment Terms
TT, LC
Package
carton
Keyword :
Category
Contact
Qiqin Huang
Selling Leads Detail
Company Info
 
Quick Detail
Place of Origin
China [CN]
Brand Name
DOODSIF/MASHIDI/BOYITE
HS-CODE
9701-90
Package & Delivery Lead Time
Package
carton
Detailed Description
 
Product Name/Model:BYTF605-Epoxy Primer
 
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal, good adhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemical corrosion resistance and rust resistance.
Substrates
Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel,glass fiber reinforced plastic.
Surface Cleaning
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio
BYTF605 Epoxy Primer
BYTH105 Epoxy Hardener 
BYTX-5 Epoxy Thinner
4
1
1~2
<30℃
BYTF605 Epoxy Primer
BYTH105 Epoxy Hardener  
BYTX-5 Epoxy Thinner
Spray Viscosity
16-19s to drop off, in 4# viscosity cup at 25°C,
Pot-life
At 20°C, 3 hours with hardener.
Re-Treatment
Sanded with P600 or P800 sand paper, do following construction after drying
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology
Coats&Thickness: 2-3 coats, total 25-35um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature andpaint film.
Drying Time
A. Allow 10-20 minutes air-drying,then 60°C baking 30 minutes, can sand after cooldown.B. Air-drying time 3 hours, at 20°C.
Shelf Life
2 years in original sealed can, cool and dry place at 25℃.
Package
1L×12 or 3.75L×4
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
More information please view here!  

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top