Product Type: XKJC-9J
Scope:
Suitable for measuring the index of glial layer bituminous coal (maximum thickness of plastic layer Y, X, and volume shrinkage of the final curve three indicators) of special equipment. In line with the national standard GB / T479-2000 "Determination of glial layer index of bituminous coal" requirements, it can be widely used in coal, metallurgy, coking coal quality testing department and other industries.
Features:
XKJC-9J Automatic glial layer analyzer,through smart sensor robot to replace the manual probe, automatic measurement glial layer of the upper and lower level positions, data analysis and processed by a computer to calculate the maximum thickness of the colloid, namely Y value. It is developed in full accordance with national standards, set intelligent temperature control, intelligent mechanical measurement, intelligent graphical analysis and a number of cutting-edge technology and technology in one, so that the automatic glial layer measurements in the true sense. Automatic glial layer analyzer by a mainframe computer, printer, gelatinous layer furnace, robot controllers and intelligent sensors (core) somewhat, whose performance characteristics are as follows:
1. Colloidal thickness measured by the robot, testing the entire process without human intervention, effectively reduce the labor intensity field, reduce human error and improve the measurement accuracy.
2. Precise PID temperature control, auxiliary fuzzy control, in strict accordance with GB / T479-2000 requirements for temperature control.
3. Oven stove lever parallel front, all with low pressure plate design, X volume before and after displacement sensors mounted in parallel, to ensure maximum accuracy of test samples in parallel.
4. The upper curve and lower curve using the most accurate mathematical model to draw, to ensure uniform distribution of all measurement points measured in two curves, curve smoothing, to ensure the reasonableness and accuracy of measurement results.
5. Smart sensor robot using 3D design, all parameters have to undergo rigorous 3D simulation testing to ensure that the failure rate is extremely low. Manipulator quality of implementation three-year warranty. Within three years if damaged, replace it for free.
6. Domestic unique design of power protection, power outages, even if the measurement process, and then power can continue after the measurement, all data can be effectively protected.
7. Measuring the timing of the measurement rules to automatically determine the upper and lower portion of the software can be in strict accordance with national standards, and can display the curve colloid thickness, automatically calculate the maximum value -Y glial layer thickness.
8. Probes using high-strength rotary design, the probe during measurement can rotate up and down, effectively reducing the influence of the measurement process of the colloidal level, to ensure that the shape of the volume curve is not destroyed.
9. Control lines closed, and modular design, low failure rate, maintenance simple.
Technical parameters:
Temperature range: (0 ~ 800) ℃
Temperature accuracy: ± 3 ℃
Power supply voltage: AC220V (± 10%), 50Hz
Accuracy: Y error: Y> 20mm, the error <2mm
Y <20mm, the error <1mm
X Error: ΔX <3mm
Temperature element: K-type thermocouple
Accuracy: 0.5
Pressure sensor: 0 ~ 20kg
Displacement sensor: 0 ~ 200mm; precision 2
Motor static torque: 10N.cm
Probe rotation: Yes
Print mode: three kinds
Power restored: Yes, personalization software interface
Random Accessories:Lenovo brand computers, 19-inch LCD monitor
Instrument Conditions of Use: The instrument should be installed in the 0 ~ 40 ℃, humidity ≦ 80%, the power supply voltage AC220 (1 ± 10%) V, 50Hz, no strong electromagnetic field, non-corrosive gases, and exhaust systems, air circulation places.
China [CN] 
Click enlarge Image