FST-6700 2M E1/Datacom Transmission Analyzers

Selling Leads Detail

Company Info

 

FST-6700 2M E1/Datacom Transmission Analyzers FST-6700 Series E1/Datacom tester,2M Datacom Transmission Analyzers can be used to test the digital channels with 2Mbit/s interfaces and with V.24/V.28/RS232, V.35, V.36, RS449, X.21, RS485, EIA530, EIA530A, and equidirectional G.703 CO 64kbit/s interfaces. Major Features LCD large-screen display, 320*240 lattice, backlight, LED indicator Hand held, auto configuration  Multi-task operation at one time Store 20 test results and 9 test configurations, with power-off memories PC operation, store, analysis, print Programmable timer Alarm and histogram analysis Software updating Major Functions For 2Mbit/s: Service-interrupted error testing Online error testing Framed and unframed signals generation and reception 2Mbit/s unframed error performance testing 2Mbit/s framed N*64kbit/s channel error testing Bit error, coding error, frame error, CRC error and E bit error testing Signal loss alarm, AIS alarm, framed remote alarm, multi-framed remote alarm, out-of-frame, and pattern loss alarm  Frequency offset testing Line signal level and frequency testing Voice channel signal level and frequency testing Pattern slip testing Clock slip testing Straightforward signaling Audio frequency testing Loop circuit delay testing  Automatic protection switching time testing (APS) Clock bias function Sound monitoring Duplex 2Mbit/s detecting and monitoring Signal state display. Voice channel content display. Voice channel busy indication Alarm and error histogram analysis  Time slot content analysis, drop and insert signal on each time slot  Framed content analysis G.703 module analysis G. 821/G. 826/M. 2100 error analysis Multi error and alarm inserting  Three input modes (terminating, bridging and monitoring) Three clock options (internal, external and picking-up); For Datacom: V.24/RS232/V.28, V.35, V.36, X.21, RS-449, RS-485, RS422, EIA-530, EIA-530A datacom testing SYNCH and ASYNCH testing DTE and DCE emulation Bit code testing  Pattern slip testing Signal loss alarm Line signal level and frequency testing Loop delay testing Automatic protection switching time testing(APS) G.821, M2100 service interrupt error testing For co-directional 64Kbit/s: Service interrupt error testing Bit code testing Pattern slip testing Signal loss, AIS alarm Line signal frequency testing Loop delay testing Automatic protection switching time testing(APS) G.821, M.2100 error testing Technical Index 2M Technical Index (1) Signal input rate: 2048kbit/s+100ppm(G.703 requirement+50PPM)  (2) Signal coding: HDB3, AMI. (3) Input jitter tolerance: Up to the requirement of Figure 10.1. Input Jitter Tolerance (4) Input balance response: Attenuation complies with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz. (5) Input Impedance (5.1) Unbalance terminating:  75Ω Balance terminating: 120Ω    Reflection loss    >18dB within 50Hz ~3100kHz. (5.2) Unbalance bridging:  >750Ω Balance bridging:    >1200Ω (5.3) Unbalance  monitoring: 75Ω,26dB gain Balance monitoring: 120Ω , 26dB    gain Reflection loss    >18dB within 50Hz??3100kHz. (6) Signal structure (6.1) Non-frame structure  (6.2) Frame  structure: PCM30, PCM31, PCM30CRC, PCM31CRC Frame structure    complies with the requirement of G. 704. (7) Testing pattern: 26-1??29-1??211-1??215-1??220-1??223-1, and artificial code (8) Impedance of output interface: (8.1)  Non-balance 75Ω, up to G. 703 (8.2) Balance 120Ω, up to G.  703. (9) External clock input (9.1) Signal form: HDB3,  NRZ (9.2) Balance terminating resistance: 120Ω  Unbalance    terminating resistance: 75Ω Balance bridging resistance:    >1200Ω Unbalance bridging resistance:    >750Ω (10) Error code insertion: None, single, or ratio 10-1 ~ 10-7.  Co-directional 64k Technical Index (1) Signal input rate: 64 kbit/s+100ppm(G.703 requirement+100PPM)  (2) Input impedance: Balance 120 Ω, up to G.703 (3) Input jitter tolerance: Up to G.823. (4) Impedance of output interface: Balance 120Ω, up to G.703 (5) Testing pattern:26-1??29-1??211-1??215-1??220-1??223-1, and artificial code Input Impedance Datacom Index (1) Data interface type: V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A. (2) Generator (2.1) SYNCH mode      Clock source: Internal or external clock Phase relation between    clock and data: co-direction or reverse direction. Rate: 1.2,    2.4, 4.8, 9.6, 14.4, 19.2, 38.4, 48, 56(kbps), N*64kbps(N=1~32)     Error: +15ppm(ppm: parts per million) (2.2) ASYNCH mode  Rate:    50,75,110,150,200,300,600,1200,2400,3600,4800,7200,9600,14.4k,19.2k,38.4k,57.6k(bps)  Data structure: Word length: 5,6,7,8(bits), Stop bit: 1,2(bits).    Odd-even check: odd, even, 1, 0, none   (2.3) Error code  insertion: None, single, or ratio 10-1 ~ 10-7. (3) Receiver   (3.1) SYNCH mode Clock source: Internal or external    clock Phase relation between receive clock and receive data:    Equidirection or reverse direction. Clock Rate: 2048kbps at a    maximum (3.2) ASYNCH mode  The rate and data are the    same as those of the generator. (4) Testing pattern: 26-1??29-1??211-1??215-1??220-1??223-1, and artificial code Other Parameters Power supply (1)  Special power adapter Input: AC220V 50Hz    Output:    DC 9V 1A (2) Internal rechargeable battery  4000mAh,    6V nickel-hydrogen rechargeable battery Working time: 8    hours Charging: 8 hours at power-off state, and 12 hours at    power-on state. Dimension and weight L*W*H:  200*160*42mm Weight: 950g  Ambient parameters   Operation temperature: 0~40o C Storage Temperature: -30~+70oC Humidity:  5%~90%, non-condensing Standard Configuration No. Item Qty 1 FST-6700 Series 2M Transmission Analyzers 1 set Attached files 2 User's manual 1 pc 3 Software disc 1 pc Attached accessories 4 75ΩCoaxial testing line 1 pc 5 BNC-L9 Testing line CESHIYI 2 pcs 6 RS232 serial line 1 pc 7 Special testing cable of data communication 1(V.24,RS-485,EIA-530,EIA-530A) 1 pc 8 Special testing cable of data communication 2 (RS-449,V.36) 1 pc 9 Special testing cable of data communication 3 (X.21) 1 pc 10 Special testing cable of data communication 4 (V.35) 1 pc 11 G.703 CO special testing cable (64Kb/s coaxial interface) 1 pc 12 Power adapter 1 pc 13 Data self-loop head 1 pc 14 Switch cable 1 pc 15 Handy-case 1 pc 16 Serial printing line (optional) 1 pc 2M/Datacom Transmission Analyzer Table Item FST-6700A FST-6700C FST-6700E E1 Measurement Yes Yes Yes Datacom Measurement No Yes Yes Audio/Listen Yes Yes Yes Frequency Deviation No Yes Yes Pulse Mask No Yes Yes Co directional 64K Optional Optional Yes Ethernet Optional Optional Yes Jitter Optional Optional No Frame Relay Optional Optional Yes AC Power Adapter AC220V 50Hz/DC 9V 1A Rechargeable Batteries 5*1.2V AA NiMH batteries Operating/Storage Temperature 0oC~50oC/-20~+70oC Humidity 5%~95% non-condensing Dimensions/Weight 200*160*42mm/2kg

Basic Company Information

Foresight Electronics Co.,Ltd.

Company Advantage

Detail Company Introduction